| Tecknit Europe |
|---|
| About Us |
| Products |
| Technical Archive |
| Order Status |
| Exhibition Diary |
| Contact Us |
| Info Request |
Tecknit Inc. USA
Click here to visit Tecknit Inc. USA
Shielding problem?
|
Product Information | 
|
|---|
|
Using a 3 axis, robotic dispensing system, a liquid gasket may be dispensed directly onto your product. With a choice of either conductive, or non-conductive silicone materials, the process eliminates the need for complex tooling, as only a holding jig needs to be produced. |
|---|
| The gasket is moisture cured at room temperature, allowing dispensing onto components with low melting points, such as plastics. The product reaches full cure in 24 hours and can be dispensed with a profile tolerance of ± 0.1mm. |
|---|
| Material Specifications Touch dry in 20 minutes Full cure in 24hrs Various types of compounds are available, including Ag/Cu, Ag/glass, Ni/glass, and pure Ag types Shore A hardness typically 50± 6 Temperature range -55°C to 125°C (Other ranges available) Specific resistance; 0.08 ohms.cm-1 after 6 days @ 90°C 0.09ohms.cm-1 Cost effective silicone only material option (non-conductive) for environmental seals where EMI shielding is not required |
 Please call Tecknit Europe today for a full specification, and ask about our new rapid prototype service. |
|---|
|
Home |
Next |
|
|---|---|